Fire Alarm Annual Inspection
CAN/ULC-S536 Estimate Form
Building Name : -
Address : -
Date
Copyright - CFAA - All rights reserved except permission to print is granted
FIRE
ALARM SYSTEM
Section1: Insert a number to indicate the sumtotal of all the
main
fire alarm control panels you have protecting your building.
FIRE ALARM CONTROL PANELS IN YOUR BUILDING
Quantity of panels
TIME to Test (minutes)
TOTAL Time to test all panels
Small Fire Alarm Control Panels (1-20 Zones)
60
Mid-size Fire Alarm Control Panels (21-50 Zones)
120
Large Fire Alarm Control Panels (+50 Zones)
180
DEVICES
Section 2: Insert a number to indicate the sumtotal of all the fire alarm annunciators, including any
remote
fire alarm panels you have in your building.
FIRE ALARM ANNUNCIATOR/REMOTE FIRE ALARM PANELS
Quantity of panels
TIME to Test (minutes)
TOTAL Time to test all panels
Small Fire Alarm Annunciators (1-20 Zones)
15
Mid-size Fire Alarm Annunciators (21-50 Zones)
30
Large Fire Alarm Control Annunciators (+50 Zones)
60
Remote fire alarm panels (transponders)
30
FIELD DEVICES
Section 3: Insert a number to indicate the sumtotal of each of the various fire alarm devices you have in your building. If you don't want to walk around your building to count devices, your original verification report may be a good source for this information.
FIRE ALARM DEVICES
Quantity of devices
TIME to Test (minutes)
TOTAL Time to test all devices
Manual Station
2
Heat Detector
3
Addressable Smoke Detector
3
Conventional Smoke Detector
7
Duct Smoke Detector
15
Bells/Horns/Speakers
2
Fire Alarm Strobes
2
Fire Fighter's Telephones
4
Sprinkler Flow Switches
10
Sprinkler Tamper Switch
2
Sprinkler Pressure Switch
5
Door Holders
2
Misc. Aux. Device
5
ACCESS DIFFICULTY
Section 4: To obtain a more accurate time estimate for your building fire alarm inspection, indicate the average ceiling height throughout your facility. This height translates into a difficulty factor to test all the devices located on the ceiling.
BUILDING CEILING HEIGHT
% @ this height
DIFFICULTY CODE
OVERALL DIFFICULTY
Normal Access (8 foot ceilings)
1.0
Some Difficulty (>8 foot ceilings)
1.1
Difficult Access (very high areas - >20 feet)
1.2
Very Difficult (restricted access - secuirity escort)
1.3
HOURS
TASK BREAKDOWN TO COMPLETE INSPECTION
HOURS
2 TECHNICIANS
OVERALL TIME (Hours)
Basic Fire Alarm Test and Inspection per CAN/ULC-S536-04
Extra time to test your audible devices AFTER normal business hours
TOTAL TIME
The number shown on the right is an approximate calculation of the amount of man-hours required to complete a proper fire alarm test according to the testing procedure demanded by CAN/ULC-S536-04. Considering that this number reflects a total for 2 technicians, the amount of time spent on site would be half the indicated number.